What goes into a RADYS down jacket? Find out what 90/10, 800 cuin and fill weight mean, and which model is right for you.
A lightweight jacket for your backpack. A warm layer for a break at the summit. Or a winter jacket that combines insulation with waterproof weather protection.
Our down jackets are designed for different purposes. What matters is what they contain and how the insulation is constructed.
Terms such as “90/10,” “800 cuin” or “70 g/m²” can help you make your choice. However, they describe different properties. Knowing the difference also helps you understand why two jackets with the same down quality can provide different levels of warmth.
Why down insulates so well at such a low weight
Air is trapped between the down's fine branches. These air pockets slow the loss of your body's heat. For this to work, the insulation needs room to loft.
High-quality down provides plenty of loft at a low weight. It can also be compressed significantly and regains its loft after unpacking. This makes it ideal for a warm layer that stays in your backpack during the ascent and is ready to hand when you take a break.
What does a filling of 90% down and 10% feathers mean?
With the R3 Alpine Light Down Jacket and the R3 Alpine Down Jacket, the insulation consists of 90% goose down and 10% small feathers.
This information describes the composition of the fill. The outer fabric, pocket lining and zippers are not included.
Down forms fine, three-dimensional structures. Feathers, on the other hand, have a clearly defined quill. With their high down content, the two R3 models offer lightweight, lofty insulation.
However, the blend ratio alone doesn’t tell you how warm the finished jacket will be. You also need to consider fill power, fill weight and construction.
800 cuin: The fill power of down
RADYS uses RDS-certified down with 800 cuin fill power for its R’Down technology.
“Cuin” stands for cubic inches. This measurement describes the volume a specific amount of down filling occupies under defined test conditions.
A high fill power means the fill can create a lot of volume for its weight. With the same fill weight, down with higher fill power can therefore provide more insulation than down with a lower value.
800 cuin does not mean 800 grams of filling or indicate a temperature. It describes a property of the fill material. The warmth of the entire jacket depends on its construction.

Fill weight and total weight: two different measurements
In addition to down quality, the amount of filling used is important.
For example, the R3 Alpine Light Down Jacket has a down fill weight of 70 g/m². This describes the fill weight per unit area, not the total weight of the down in the jacket. The listed total weight of the men's model is 250 grams and includes the fabric, zippers and other components.
You should therefore ask three questions to make a comparison:
-
What is the quality and composition of the filling?
-
How much of it is used?
-
How does the construction distribute and protect this fill?
A higher cuin rating alone doesn’t automatically make a jacket warmer than every model with a lower rating.
Our down jackets and what they’re designed for
R3 Alpine Light Down Jacket: The lightweight insulating layer
The R3 Alpine Light Down Jacket is designed to be lightweight and pack down small.
It contains 90% goose down and 10% small feathers with 800 cuin, complemented by a lightweight 15-denier polyamide outer fabric. The fill is RDS-certified.
The jacket works as an extra insulating layer under a weatherproof jacket or can be worn on its own in suitable conditions.
Our recommendation: If you’re looking for a packable layer of warmth for tours, chilly mornings, and the transitional seasons.
R3 Alpine Down Jacket: More warmth for cold days on the trail
The R3 Alpine Down Jacket is more focused on warmth for cold alpine conditions and breaks.
Here too, an RDS-certified blend of 90% goose down and 10% small feathers with 800 cuin is used. The baffle fabric is made without conventional quilting stitches. The adjustable hood adds insulation around the head. The men's model is listed at a total weight of 450 grams.
The down quality is comparable to that of the Light version. The jackets differ mainly in their intended use and construction.
Our recommendation: If you want extra warmth for cold summit breaks, winter tours and longer stays outdoors.
R1 Down Tech Jacket: Down warmth and weather protection combined
The R1 Down Tech Jacket combines RDS-certified down insulation with a waterproof and windproof outer layer.
It also uses R’Down technology with 800 cuin. It also features H-Construction: Vertical joins between the fabric layers give the insulation room to loft and reduce cold spots where the chambers meet. This construction does away with classic continuous quilting seams through the outer fabric.
While you pair an R3 insulated jacket with a separate hardshell in wet weather, the R1 Down Tech combines both functions in one jacket.
Our recommendation: If you're looking for an insulated jacket with integrated weather protection for cold snow sports days, a winter hike or a visit to the Christmas market.
RDS: What lies behind the origin of our down
The Responsible Down Standard, or RDS for short, sets requirements for animal welfare and the supply chain for down and feathers.
Its requirements include a ban on live plucking and force-feeding. Independent certification bodies check compliance with the standard. Certified materials are documented throughout the supply chain.
RDS describes the origin and treatment of the animal-derived material. A jacket’s loft or warmth is described using other specifications.
Not every insulated RADYS jacket contains down
A jacket with baffles can also be insulated with synthetic fibers.
The R3 Insulated Jacket uses synthetic fiber fill, for example. RADYS describes the technology as fine recycled polyester fibers formed into small clusters. This makes it an alternative for anyone looking for insulation without down.
When choosing, pay attention to the specific fill listed for the model. “Down” refers to down, while “Insulated” initially just means that the jacket is insulated.
Which insulation layer is right for you?
If you often carry the jacket in your backpack, weight and pack size are especially important. The R3 Alpine Light Down is a suitable option for this.
If you’re looking for more warmth for cold breaks and alpine touring days, consider the R3 Alpine Down.
If you want down warmth and waterproof protection in one jacket, the R1 Down Tech is designed for you.
Choose based on how you’ll use it: How much will you be moving? How long will you be standing or sitting outside? And would you like to be able to combine warmth and weather protection separately?
This is how you find the jacket whose insulation and construction suit your next days in the mountains.


